Direct-current drives MEZOMATIC–K (produced since 1985) were equipped with thyristor converters FORMIC and DC motors of HG series with excitation by ferrite permanent magnets.

Drives MEZOMATIC–K were especially designed for axes drives of machine tools with continuous position control, for industrial robots and manipulators.

Motors of SHZ series

DC servodrives with permanent magnets are constructed with a radial-type commutator for shortening of outer dimensions and weight reduction and they are suitable for ecologic drives of small two-wheeled vehicles (scooter, bicycle), for drives of fans, pumps etc.

 Motors of HG series

• two type sizes - HG71 and HG112
• range of stall torques at zero speed is in the range from 4,2 to 42 Nm
• nominal speed 500 or 750 min^-1, according to size of the motor
• built-in DC. tachogenerator 20 V/1000 min^-1 and safety brake 5 Nm for HG71 and 20 Nm for HG112, power supply 24 V DC
• motor protection IP 44, cooling IC 410

• IM 3001 (flange mounted motors)
  

Motors of SHZ series

• basic output of the SHZ series is 170 W,  DC powering 24 V (from battery)
• free shaft end ø 12 mm, on the end there is a screw M8
• excitation – permanent magnets
• direction of rotation – both– reversal of polarity driving voltage
• motor protection IP 44, cooling system IC410
• motors are designed for standard environment with ambient temperature from -20 to +40 °C, to elevation to 1000 m

Detailed information you can find under the bookmark Documents for Download.